Resource StructureDefinition/FHIR Server from package nhsd.assets.stu3#1.7.0 (219 ms)
Package | nhsd.assets.stu3 |
Type | StructureDefinition |
Id | Id |
FHIR Version | R3 |
Source | https://simplifier.net/resolve?scope=nhsd.assets.stu3@1.7.0&canonical=https://fhir.nhs.uk/STU3/StructureDefinition/CareConnect-GPC-DiagnosticReport-1 |
Url | https://fhir.nhs.uk/STU3/StructureDefinition/CareConnect-GPC-DiagnosticReport-1 |
Version | 1.3.0 |
Status | draft |
Date | 2020-02-17 |
Name | CareConnect-GPC-DiagnosticReport-1 |
Experimental | False |
Authority | hl7 |
Description | A test report for National Pathology that contains data on the pathology tests performed on patients specimens populated by the performing orgnaisation. |
Purpose | CURATED BY INTEROPen see: http://www.interopen.org/careconnect-curation-methodology/ |
Copyright | Copyright © 2020 HL7 UK
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
HL7® FHIR® standard Copyright © 2011+ HL7
The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at
https://www.hl7.org/fhir/license.html |
Type | DiagnosticReport |
Kind | resource |
Resources that use this resource
Resources that this resource uses
Source
{
"resourceType" : "StructureDefinition",
"url" : "https://fhir.nhs.uk/STU3/StructureDefinition/CareConnect-GPC-DiagnosticReport-1",
"version" : "1.3.0",
"name" : "CareConnect-GPC-DiagnosticReport-1",
"status" : "draft",
"date" : "2020-02-17",
"publisher" : "HL7 UK",
"contact" : [
{
"name" : "INTEROPen",
"telecom" : [
{
"system" : "email",
"value" : "admin@interopen.org",
"use" : "work"
}
]
}
],
"description" : "A test report for National Pathology that contains data on the pathology tests performed on patients specimens populated by the performing orgnaisation.",
"purpose" : "CURATED BY INTEROPen see: http://www.interopen.org/careconnect-curation-methodology/",
"copyright" : "Copyright © 2020 HL7 UK\r \rLicensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at\r \rhttp://www.apache.org/licenses/LICENSE-2.0\r \rUnless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.\r \rHL7® FHIR® standard Copyright © 2011+ HL7\r \rThe HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at\r \rhttps://www.hl7.org/fhir/license.html",
"fhirVersion" : "3.0.1",
"kind" : "resource",
"abstract" : false,
"type" : "DiagnosticReport",
"baseDefinition" : "http://hl7.org/fhir/StructureDefinition/DiagnosticReport",
"derivation" : "constraint",
"snapshot" : {
"element" : [
{
"id" : "DiagnosticReport",
"path" : "DiagnosticReport",
"short" : "A Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports",
"definition" : "The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.",
"comment" : "This is intended to capture a single report, and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing.",
"alias" : [
"Report",
"Test",
"Result",
"Results",
"Labs",
"Laboratory"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "Resource",
"min" : 0,
"max" : "*"
},
"constraint" : [
{
"key" : "dom-2",
"severity" : "error",
"human" : "If the resource is contained in another resource, it SHALL NOT contain nested Resources",
"expression" : "contained.contained.empty()",
"xpath" : "not(parent::f:contained and f:contained)"
},
{
"key" : "dom-1",
"severity" : "error",
"human" : "If the resource is contained in another resource, it SHALL NOT contain any narrative",
"expression" : "contained.text.empty()",
"xpath" : "not(parent::f:contained and f:text)"
},
{
"key" : "dom-4",
"severity" : "error",
"human" : "If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated",
"expression" : "contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()",
"xpath" : "not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))"
},
{
"key" : "dom-3",
"severity" : "error",
"human" : "If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource",
"expression" : "contained.where(('#'+id in %resource.descendants().reference).not()).empty()",
"xpath" : "not(exists(for $id in f:contained/*/@id return $id[not(ancestor::f:contained/parent::*/descendant::f:reference/@value=concat('#', $id))]))"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "Entity. Role, or Act"
},
{
"identity" : "workflow",
"map" : "Event"
},
{
"identity" : "v2",
"map" : "ORU -> OBR"
},
{
"identity" : "rim",
"map" : "Observation[classCode=OBS, moodCode=EVN]"
},
{
"identity" : "w5",
"map" : "clinical.diagnostics"
}
]
},
{
"id" : "DiagnosticReport.id",
"path" : "DiagnosticReport.id",
"short" : "Logical id of this artifact",
"definition" : "The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.",
"comment" : "The only time that a resource does not have an id is when it is being submitted to the server using a create operation.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Resource.id",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "id"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.meta",
"path" : "DiagnosticReport.meta",
"short" : "Metadata about the resource",
"definition" : "The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Resource.meta",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "Meta"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.meta.id",
"path" : "DiagnosticReport.meta.id",
"representation" : [
"xmlAttr"
],
"short" : "xml:id (or equivalent in JSON)",
"definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Element.id",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.meta.extension",
"path" : "DiagnosticReport.meta.extension",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "url"
}
],
"description" : "Extensions are always sliced by (at least) url",
"rules" : "open"
},
"short" : "Additional Content defined by implementations",
"definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "Element.extension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.meta.versionId",
"path" : "DiagnosticReport.meta.versionId",
"short" : "Version specific identifier",
"definition" : "The version specific identifier, as it appears in the version portion of the URL. This values changes when the resource is created, updated, or deleted.",
"comment" : "The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Meta.versionId",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "id"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.meta.lastUpdated",
"path" : "DiagnosticReport.meta.lastUpdated",
"short" : "When the resource version last changed",
"definition" : "When the resource last changed - e.g. when the version changed.",
"comment" : "This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Meta.lastUpdated",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "instant"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.meta.profile",
"path" : "DiagnosticReport.meta.profile",
"short" : "Profiles this resource claims to conform to",
"definition" : "A list of profiles (references to [StructureDefinition](structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url]().",
"comment" : "It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.",
"min" : 1,
"max" : "*",
"base" : {
"path" : "Meta.profile",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "uri"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.meta.security",
"path" : "DiagnosticReport.meta.security",
"short" : "Security Labels applied to this resource",
"definition" : "Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.",
"comment" : "The security labels can be updated without changing the stated version of the resource The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.",
"min" : 0,
"max" : "*",
"base" : {
"path" : "Meta.security",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Coding"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "SecurityLabels"
},
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding",
"valueBoolean" : true
}
],
"strength" : "extensible",
"description" : "Security Labels from the Healthcare Privacy and Security Classification System.",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/security-labels"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6"
},
{
"identity" : "rim",
"map" : "CV"
},
{
"identity" : "orim",
"map" : "fhir:Coding rdfs:subClassOf dt:CDCoding"
}
]
},
{
"id" : "DiagnosticReport.meta.tag",
"path" : "DiagnosticReport.meta.tag",
"short" : "Tags applied to this resource",
"definition" : "Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.",
"comment" : "The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.",
"min" : 0,
"max" : "*",
"base" : {
"path" : "Meta.tag",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Coding"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "Tags"
}
],
"strength" : "example",
"description" : "Codes that represent various types of tags, commonly workflow-related; e.g. \"Needs review by Dr. Jones\"",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/common-tags"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6"
},
{
"identity" : "rim",
"map" : "CV"
},
{
"identity" : "orim",
"map" : "fhir:Coding rdfs:subClassOf dt:CDCoding"
}
]
},
{
"id" : "DiagnosticReport.implicitRules",
"path" : "DiagnosticReport.implicitRules",
"short" : "A set of rules under which this content was created",
"definition" : "A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.",
"comment" : "Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. \n\nThis element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Resource.implicitRules",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "uri"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isModifier" : true,
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.language",
"path" : "DiagnosticReport.language",
"short" : "Language of the resource content",
"definition" : "The base language in which the resource is written.",
"comment" : "Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Resource.language",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "code"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet",
"valueReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/all-languages"
}
},
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "Language"
},
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding",
"valueBoolean" : true
}
],
"strength" : "extensible",
"description" : "A human language.",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/languages"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.text",
"path" : "DiagnosticReport.text",
"short" : "Text summary of the resource, for human interpretation",
"definition" : "A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it \"clinically safe\" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.",
"comment" : "Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded in formation is added later.",
"alias" : [
"narrative",
"html",
"xhtml",
"display"
],
"min" : 0,
"max" : "1",
"base" : {
"path" : "DomainResource.text",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "Narrative"
}
],
"condition" : [
"ele-1",
"dom-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
},
{
"identity" : "rim",
"map" : "Act.text?"
}
]
},
{
"id" : "DiagnosticReport.contained",
"path" : "DiagnosticReport.contained",
"short" : "Contained, inline Resources",
"definition" : "These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.",
"comment" : "This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.",
"alias" : [
"inline resources",
"anonymous resources",
"contained resources"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "DomainResource.contained",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Resource"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "Entity. Role, or Act"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.extension",
"path" : "DiagnosticReport.extension",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "url"
}
],
"description" : "Extensions are always sliced by (at least) url",
"rules" : "open"
},
"short" : "Additional Content defined by implementations",
"definition" : "May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "DomainResource.extension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.modifierExtension",
"path" : "DiagnosticReport.modifierExtension",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "url"
}
],
"description" : "Extensions are always sliced by (at least) url",
"rules" : "open"
},
"short" : "Extensions that cannot be ignored",
"definition" : "May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "DomainResource.modifierExtension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"isModifier" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.identifier",
"path" : "DiagnosticReport.identifier",
"short" : "Business identifier for report",
"definition" : "Identifiers assigned to this report by the performer or other systems.",
"comment" : "Usually assigned by the Information System of the diagnostic service provider (filler id).",
"requirements" : "Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context.",
"alias" : [
"ReportID",
"Filler ID",
"Placer ID"
],
"min" : 1,
"max" : "*",
"base" : {
"path" : "DiagnosticReport.identifier",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Identifier"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CX / EI (occasionally, more often EI maps to a resource id or a URL)"
},
{
"identity" : "rim",
"map" : "II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]"
},
{
"identity" : "servd",
"map" : "Identifier"
},
{
"identity" : "workflow",
"map" : "Event.identifier"
},
{
"identity" : "v2",
"map" : "OBR-51"
},
{
"identity" : "rim",
"map" : "id"
},
{
"identity" : "w5",
"map" : "id"
}
]
},
{
"id" : "DiagnosticReport.identifier.id",
"path" : "DiagnosticReport.identifier.id",
"representation" : [
"xmlAttr"
],
"short" : "xml:id (or equivalent in JSON)",
"definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Element.id",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.identifier.extension",
"path" : "DiagnosticReport.identifier.extension",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "url"
}
],
"description" : "Extensions are always sliced by (at least) url",
"rules" : "open"
},
"short" : "Additional Content defined by implementations",
"definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "Element.extension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.identifier.use",
"path" : "DiagnosticReport.identifier.use",
"short" : "usual | official | temp | secondary (If known)",
"definition" : "The purpose of this identifier.",
"comment" : "This is labeled as \"Is Modifier\" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.",
"requirements" : "Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Identifier.use",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "code"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isModifier" : true,
"isSummary" : true,
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "IdentifierUse"
}
],
"strength" : "required",
"description" : "Identifies the purpose for this identifier, if known .",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/identifier-use"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "N/A"
},
{
"identity" : "rim",
"map" : "Role.code or implied by context"
}
]
},
{
"id" : "DiagnosticReport.identifier.type",
"path" : "DiagnosticReport.identifier.type",
"short" : "Description of identifier",
"definition" : "A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.",
"comment" : "This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. \n\nWhere the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.",
"requirements" : "Allows users to make use of identifiers when the identifier system is not known.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Identifier.type",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "CodeableConcept"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "IdentifierType"
},
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding",
"valueBoolean" : true
}
],
"strength" : "extensible",
"description" : "A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/identifier-type"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CE/CNE/CWE"
},
{
"identity" : "rim",
"map" : "CD"
},
{
"identity" : "orim",
"map" : "fhir:CodeableConcept rdfs:subClassOf dt:CD"
},
{
"identity" : "v2",
"map" : "CX.5"
},
{
"identity" : "rim",
"map" : "Role.code or implied by context"
}
]
},
{
"id" : "DiagnosticReport.identifier.system",
"path" : "DiagnosticReport.identifier.system",
"short" : "The namespace for the identifier value",
"definition" : "Establishes the namespace for the value - that is, a URL that describes a set values that are unique.",
"comment" : "see http://en.wikipedia.org/wiki/Uniform_resource_identifier",
"requirements" : "There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.",
"min" : 1,
"max" : "1",
"base" : {
"path" : "Identifier.system",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "uri"
}
],
"example" : [
{
"label" : "General",
"valueUri" : "http://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CX.4 / EI-2-4"
},
{
"identity" : "rim",
"map" : "II.root or Role.id.root"
},
{
"identity" : "servd",
"map" : "./IdentifierType"
}
]
},
{
"id" : "DiagnosticReport.identifier.value",
"path" : "DiagnosticReport.identifier.value",
"short" : "The value that is unique",
"definition" : "The portion of the identifier typically relevant to the user and which is unique within the context of the system.",
"comment" : "If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).",
"min" : 1,
"max" : "1",
"base" : {
"path" : "Identifier.value",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"example" : [
{
"label" : "General",
"valueString" : "123456"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CX.1 / EI.1"
},
{
"identity" : "rim",
"map" : "II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)"
},
{
"identity" : "servd",
"map" : "./Value"
}
]
},
{
"id" : "DiagnosticReport.identifier.period",
"path" : "DiagnosticReport.identifier.period",
"short" : "Time period when id is/was valid for use",
"definition" : "Time period during which identifier is/was valid for use.",
"comment" : "This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. \"the patient was an inpatient of the hospital for this time range\") or one value from the range applies (e.g. \"give to the patient between these two times\"). If duration is required, specify the type as Interval|Duration.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Identifier.period",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "Period"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "per-1",
"severity" : "error",
"human" : "If present, start SHALL have a lower value than end",
"expression" : "start.empty() or end.empty() or (start <= end)",
"xpath" : "not(exists(f:start)) or not(exists(f:end)) or (f:start/@value <= f:end/@value)"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "DR"
},
{
"identity" : "rim",
"map" : "IVL<TS>[lowClosed=\"true\" and highClosed=\"true\"] or URG<TS>[lowClosed=\"true\" and highClosed=\"true\"]"
},
{
"identity" : "v2",
"map" : "CX.7 + CX.8"
},
{
"identity" : "rim",
"map" : "Role.effectiveTime or implied by context"
},
{
"identity" : "servd",
"map" : "./StartDate and ./EndDate"
}
]
},
{
"id" : "DiagnosticReport.identifier.assigner",
"path" : "DiagnosticReport.identifier.assigner",
"short" : "Organization that issued id (may be just text)",
"definition" : "Organization that issued/manages the identifier.",
"comment" : "The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Identifier.assigner",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "Reference",
"targetProfile" : "http://hl7.org/fhir/StructureDefinition/Organization"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ref-1",
"severity" : "error",
"human" : "SHALL have a contained resource if a local reference is provided",
"expression" : "reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))",
"xpath" : "not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "The target of a resource reference is a RIM entry point (Act, Role, or Entity)"
},
{
"identity" : "v2",
"map" : "CX.4 / (CX.4,CX.9,CX.10)"
},
{
"identity" : "rim",
"map" : "II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper"
},
{
"identity" : "servd",
"map" : "./IdentifierIssuingAuthority"
}
]
},
{
"id" : "DiagnosticReport.basedOn",
"path" : "DiagnosticReport.basedOn",
"short" : "What was requested",
"definition" : "Details concerning a test or procedure requested.",
"comment" : "Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports.",
"requirements" : "This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon.",
"alias" : [
"Request"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "DiagnosticReport.basedOn",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Reference",
"targetProfile" : "https://fhir.nhs.uk/STU3/StructureDefinition/CareConnect-GPC-ProcedureRequest-1"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ref-1",
"severity" : "error",
"human" : "SHALL have a contained resource if a local reference is provided",
"expression" : "reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))",
"xpath" : "not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])"
}
],
"mustSupport" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "The target of a resource reference is a RIM entry point (Act, Role, or Entity)"
},
{
"identity" : "workflow",
"map" : "Event.basedOn"
},
{
"identity" : "v2",
"map" : "ORC? OBR-2/3?"
},
{
"identity" : "rim",
"map" : "outboundRelationship[typeCode=FLFS].target"
}
]
},
{
"id" : "DiagnosticReport.status",
"path" : "DiagnosticReport.status",
"short" : "registered | partial | preliminary | final +",
"definition" : "The status of the diagnostic report as a whole.",
"comment" : "This is labeled as \"Is Modifier\" because applications need to take appropriate action if a report is withdrawn.",
"requirements" : "Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports.",
"min" : 1,
"max" : "1",
"base" : {
"path" : "DiagnosticReport.status",
"min" : 1,
"max" : "1"
},
"type" : [
{
"code" : "code"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isModifier" : true,
"isSummary" : true,
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "DiagnosticReportStatus"
}
],
"strength" : "required",
"description" : "The status of the diagnostic report as a whole.",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/diagnostic-report-status"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "workflow",
"map" : "Event.status"
},
{
"identity" : "v2",
"map" : "OBR-25 (not 1:1 mapping)"
},
{
"identity" : "rim",
"map" : "statusCode Note: final and amended are distinguished by whether observation is the subject of a ControlAct event of type \"revise\""
},
{
"identity" : "w5",
"map" : "status"
}
]
},
{
"id" : "DiagnosticReport.category",
"path" : "DiagnosticReport.category",
"short" : "Service category",
"definition" : "A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes.",
"comment" : "The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.",
"alias" : [
"Department",
"Sub-department",
"Service",
"Discipline"
],
"min" : 0,
"max" : "1",
"base" : {
"path" : "DiagnosticReport.category",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "CodeableConcept"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mustSupport" : true,
"isSummary" : true,
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "DiagnosticServiceSection"
}
],
"strength" : "preferred",
"description" : "Codes for diagnostic service sections.",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/diagnostic-service-sections"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CE/CNE/CWE"
},
{
"identity" : "rim",
"map" : "CD"
},
{
"identity" : "orim",
"map" : "fhir:CodeableConcept rdfs:subClassOf dt:CD"
},
{
"identity" : "v2",
"map" : "OBR-24"
},
{
"identity" : "rim",
"map" : "inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code"
},
{
"identity" : "w5",
"map" : "class"
}
]
},
{
"id" : "DiagnosticReport.category.id",
"path" : "DiagnosticReport.category.id",
"representation" : [
"xmlAttr"
],
"short" : "xml:id (or equivalent in JSON)",
"definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Element.id",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.category.extension",
"path" : "DiagnosticReport.category.extension",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "url"
}
],
"description" : "Extensions are always sliced by (at least) url",
"rules" : "open"
},
"short" : "Additional Content defined by implementations",
"definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "Element.extension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.category.coding",
"path" : "DiagnosticReport.category.coding",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "system"
}
],
"rules" : "open"
},
"short" : "Code defined by a terminology system",
"definition" : "A reference to a code defined by a terminology system.",
"comment" : "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.",
"requirements" : "Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.",
"min" : 0,
"max" : "*",
"base" : {
"path" : "CodeableConcept.coding",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Coding"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6"
},
{
"identity" : "rim",
"map" : "CV"
},
{
"identity" : "orim",
"map" : "fhir:Coding rdfs:subClassOf dt:CDCoding"
},
{
"identity" : "v2",
"map" : "C*E.1-8, C*E.10-22"
},
{
"identity" : "rim",
"map" : "union(., ./translation)"
},
{
"identity" : "orim",
"map" : "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT",
"path" : "DiagnosticReport.category.coding",
"sliceName" : "snomedCT",
"short" : "Code defined by a terminology system",
"definition" : "A reference to a code defined by a terminology system.",
"comment" : "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.",
"requirements" : "Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.",
"min" : 0,
"max" : "*",
"base" : {
"path" : "CodeableConcept.coding",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Coding"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6"
},
{
"identity" : "rim",
"map" : "CV"
},
{
"identity" : "orim",
"map" : "fhir:Coding rdfs:subClassOf dt:CDCoding"
},
{
"identity" : "v2",
"map" : "C*E.1-8, C*E.10-22"
},
{
"identity" : "rim",
"map" : "union(., ./translation)"
},
{
"identity" : "orim",
"map" : "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.id",
"path" : "DiagnosticReport.category.coding.id",
"representation" : [
"xmlAttr"
],
"short" : "xml:id (or equivalent in JSON)",
"definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Element.id",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.extension",
"path" : "DiagnosticReport.category.coding.extension",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "url"
}
],
"description" : "Extensions are always sliced by (at least) url",
"rules" : "open"
},
"short" : "Additional Content defined by implementations",
"definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "Element.extension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.extension:snomedCTDescriptionID",
"path" : "DiagnosticReport.category.coding.extension",
"sliceName" : "snomedCTDescriptionID",
"short" : "Additional Content defined by implementations",
"definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "Element.extension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension",
"profile" : "https://fhir.hl7.org.uk/STU3/StructureDefinition/Extension-coding-sctdescid"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.extension:snomedCTDescriptionID.id",
"path" : "DiagnosticReport.category.coding.extension.id",
"representation" : [
"xmlAttr"
],
"short" : "xml:id (or equivalent in JSON)",
"definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Element.id",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.extension:snomedCTDescriptionID.extension",
"path" : "DiagnosticReport.category.coding.extension.extension",
"slicing" : {
"discriminator" : [
{
"type" : "value",
"path" : "url"
}
],
"description" : "Extensions are always sliced by (at least) url",
"rules" : "open"
},
"short" : "Additional Content defined by implementations",
"definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias" : [
"extensions",
"user content"
],
"min" : 0,
"max" : "*",
"base" : {
"path" : "Element.extension",
"min" : 0,
"max" : "*"
},
"type" : [
{
"code" : "Extension"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
},
{
"key" : "ext-1",
"severity" : "error",
"human" : "Must have either extensions or value[x], not both",
"expression" : "extension.exists() != value.exists()",
"xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.extension:snomedCTDescriptionID.url",
"path" : "DiagnosticReport.category.coding.extension.url",
"representation" : [
"xmlAttr"
],
"short" : "identifies the meaning of the extension",
"definition" : "Source of the definition for the extension code - a logical name or a URL.",
"comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.",
"min" : 1,
"max" : "1",
"base" : {
"path" : "Extension.url",
"min" : 1,
"max" : "1"
},
"type" : [
{
"code" : "uri"
}
],
"fixedUri" : "https://fhir.hl7.org.uk/STU3/StructureDefinition/Extension-coding-sctdescid",
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.extension:snomedCTDescriptionID.value[x]",
"path" : "DiagnosticReport.category.coding.extension.value[x]",
"short" : "Value of extension",
"definition" : "Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).",
"comment" : "A stream of bytes, base64 encoded",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Extension.value[x]",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "base64Binary"
},
{
"code" : "boolean"
},
{
"code" : "code"
},
{
"code" : "date"
},
{
"code" : "dateTime"
},
{
"code" : "decimal"
},
{
"code" : "id"
},
{
"code" : "instant"
},
{
"code" : "integer"
},
{
"code" : "markdown"
},
{
"code" : "oid"
},
{
"code" : "positiveInt"
},
{
"code" : "string"
},
{
"code" : "time"
},
{
"code" : "unsignedInt"
},
{
"code" : "uri"
},
{
"code" : "Address"
},
{
"code" : "Age"
},
{
"code" : "Annotation"
},
{
"code" : "Attachment"
},
{
"code" : "CodeableConcept"
},
{
"code" : "Coding"
},
{
"code" : "ContactPoint"
},
{
"code" : "Count"
},
{
"code" : "Distance"
},
{
"code" : "Duration"
},
{
"code" : "HumanName"
},
{
"code" : "Identifier"
},
{
"code" : "Money"
},
{
"code" : "Period"
},
{
"code" : "Quantity"
},
{
"code" : "Range"
},
{
"code" : "Ratio"
},
{
"code" : "Reference"
},
{
"code" : "SampledData"
},
{
"code" : "Signature"
},
{
"code" : "Timing"
},
{
"code" : "Meta"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "rim",
"map" : "N/A"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.system",
"path" : "DiagnosticReport.category.coding.system",
"short" : "Identity of the terminology system",
"definition" : "The identification of the code system that defines the meaning of the symbol in the code.",
"comment" : "The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.",
"requirements" : "Need to be unambiguous about the source of the definition of the symbol.",
"min" : 1,
"max" : "1",
"base" : {
"path" : "Coding.system",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "uri"
}
],
"fixedUri" : "http://snomed.info/sct",
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "C*E.3"
},
{
"identity" : "rim",
"map" : "./codeSystem"
},
{
"identity" : "orim",
"map" : "fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.version",
"path" : "DiagnosticReport.category.coding.version",
"short" : "Version of the system - if relevant",
"definition" : "The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.",
"comment" : "Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Coding.version",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "C*E.7"
},
{
"identity" : "rim",
"map" : "./codeSystemVersion"
},
{
"identity" : "orim",
"map" : "fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.code",
"path" : "DiagnosticReport.category.coding.code",
"short" : "Symbol in syntax defined by the system",
"definition" : "A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"requirements" : "Need to refer to a particular code in the system.",
"min" : 1,
"max" : "1",
"base" : {
"path" : "Coding.code",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "code"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "C*E.1"
},
{
"identity" : "rim",
"map" : "./code"
},
{
"identity" : "orim",
"map" : "fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.display",
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable",
"valueBoolean" : true
}
],
"path" : "DiagnosticReport.category.coding.display",
"short" : "Representation defined by the system",
"definition" : "A representation of the meaning of the code in the system, following the rules of the system.",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"requirements" : "Need to be able to carry a human-readable meaning of the code for readers that do not know the system.",
"min" : 1,
"max" : "1",
"base" : {
"path" : "Coding.display",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "C*E.2 - but note this is not well followed"
},
{
"identity" : "rim",
"map" : "CV.displayName"
},
{
"identity" : "orim",
"map" : "fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName"
}
]
},
{
"id" : "DiagnosticReport.category.coding:snomedCT.userSelected",
"path" : "DiagnosticReport.category.coding.userSelected",
"short" : "If this coding was chosen directly by the user",
"definition" : "Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).",
"comment" : "Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.",
"requirements" : "This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Coding.userSelected",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "boolean"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "Sometimes implied by being first"
},
{
"identity" : "rim",
"map" : "CD.codingRationale"
},
{
"identity" : "orim",
"map" : "fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\\#true a [ fhir:source \"true\"; fhir:target dt:CDCoding.codingRationale\\#O ]"
}
]
},
{
"id" : "DiagnosticReport.category.text",
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable",
"valueBoolean" : true
}
],
"path" : "DiagnosticReport.category.text",
"short" : "Plain text representation of the concept",
"definition" : "A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.",
"comment" : "Very often the text is the same as a displayName of one of the codings.",
"requirements" : "The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.",
"min" : 0,
"max" : "1",
"base" : {
"path" : "CodeableConcept.text",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "C*E.9. But note many systems use C*E.2 for this"
},
{
"identity" : "rim",
"map" : "./originalText[mediaType/code=\"text/plain\"]/data"
},
{
"identity" : "orim",
"map" : "fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText"
}
]
},
{
"id" : "DiagnosticReport.code",
"path" : "DiagnosticReport.code",
"short" : "Name/Code for this diagnostic report",
"definition" : "A code or name that describes this diagnostic report.",
"comment" : "Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.",
"alias" : [
"Type"
],
"min" : 1,
"max" : "1",
"base" : {
"path" : "DiagnosticReport.code",
"min" : 1,
"max" : "1"
},
"type" : [
{
"code" : "CodeableConcept"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"isSummary" : true,
"binding" : {
"extension" : [
{
"url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString" : "DiagnosticReportCodes"
}
],
"strength" : "preferred",
"description" : "Codes that describe Diagnostic Reports.",
"valueSetReference" : {
"reference" : "http://hl7.org/fhir/ValueSet/report-codes"
}
},
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
},
{
"identity" : "v2",
"map" : "CE/CNE/CWE"
},
{
"identity" : "rim",
"map" : "CD"
},
{
"identity" : "orim",
"map" : "fhir:CodeableConcept rdfs:subClassOf dt:CD"
},
{
"identity" : "workflow",
"map" : "Event.code"
},
{
"identity" : "v2",
"map" : "OBR-4 (HL7 v2 doesn't provide an easy way to indicate both the ordered test and the performed panel)"
},
{
"identity" : "rim",
"map" : "code"
},
{
"identity" : "w5",
"map" : "what"
}
]
},
{
"id" : "DiagnosticReport.code.id",
"path" : "DiagnosticReport.code.id",
"representation" : [
"xmlAttr"
],
"short" : "xml:id (or equivalent in JSON)",
"definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"comment" : "Note that FHIR strings may not exceed 1MB in size",
"min" : 0,
"max" : "1",
"base" : {
"path" : "Element.id",
"min" : 0,
"max" : "1"
},
"type" : [
{
"code" : "string"
}
],
"condition" : [
"ele-1"
],
"constraint" : [
{
"key" : "ele-1",
"severity" : "error",
"human" : "All FHIR elements must have a @value or children",
"expression" : "hasValue() | (children().count() > id.count())",
"xpath" : "@value|f:*|h:div"
}
],
"mapping" : [
{
"identity" : "rim",
"map" : "n/a"
}
]
},
{
"id" : "DiagnosticReport.code.extension",
"path" : "DiagnosticReport.code.extension",
"slicing" : {
"discriminator" : [
{